wood router CNC system Offline controller Step servo generation MACH3 Weihong

wood router CNC system Offline controller Step servo generation MACH3 Weihong
  • Продавецwww.miamidolphinsvsatlantafalcons.us
  • Список ценUS $157.44piece
  • Продажная ценаUS $157.44piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,8 (546)

Oписание продукта

To All Our Dear Customers:

1. We promise all our products are from the orignal manufacturers directly;

2. We never sell the second-hand products in our store;

3. We provide 1-year warranty for all our products.

 

Newest Numerical Controller Engraving Machine DDCSV 2.1 500KHz CNC 4 Axis CNC System Step Servo Replace NC Studio MACH3 Offline Controller 

 

Brief Instruction:

The DigitalDream CNC has engaged in the numerical control industry for 7 years, specializing in the research, development and production work of various CNC (Computer Numerical Control)systems with high quality, high reliability. It can produce the common Brushless DC motor, Stepper motor driver as well as the 1 axisCNC system to 6 axesCNC system.

The DDCSV2.1 is the 4 axis and 4 axes motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.

The DDCSV2.1 numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation.

The panel layout structure of DDCSV2.1 is rational. The common off-line operation can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set.

This specification introduces the operation method of caving machine’s special off-line CNC system, DDCSV2.1 and the machine tool connection as well as operation specification. By lots of graphical representation and examples, the uses can quickly learn to use the DDCSV2.1 CNC system.

 

1

 

The panel size of the product is 163mm*102mm*5mm

The size of main body is 156mm*93mm*45mm

The size of square hole installed on the equipment cabinet is 156mm*93mm

 

2

 

3

 

5

 

4

 

DDCSV2.1 has made the following changes on the basis of DDCSV1.1:

1. The input signal is modified to support the NPN switch

2. Support limit and the home share the input port

3. Use the more stable FLASH, to ensure that no program loss

4. Upgrade algorithm, support soft interpolation, modified V1.1 version of arc interpolation bug

5. Upgrade the power module, the system is more stable.

 

Performance parameter:

Ordinary digital input interface of 16-circuitoptocoupler coupling isolation

Ordinary digital input interface of 3-circuit optocoupler coupling isolation

Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output);

Support the 3 axis stepper motor control, the highest control pulse output of single axis is 500KHz;

ARM9 main control chip;

FPGA core algorithm chip;

4.3 inches TFT screen, resolution ratio: 480*272;

17 operational keys;

The main control equipment is 18V-32V power input, the current capacity isrequired not to be lower than 0.5A;

Support the USB flash disk to read the G code,and the size of G codefile has no requirement;

Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market.

Support the panel key with single-axis manual operation, manual step and CONToperation;

Support the operation of quickly specify the running position;

Support the multi coordinate systems (with automatically saving function in case of power cut);

Support the function of saving data automatically after power down (press the start to automatically save the data in the operation, automatically save the data after power down)

 

Interface description:

The software interface totally contains 3 pages, including main page, file page and configuration page. Now the 3 pages are described as follows:

 

6

7

8

 

Packing Lists:

1 x 4 axis motion controller

1 x 8GB USB Flash Drive

1 x USB Extension Cable

 

=================================== Other Notice =========================================

 

Payment:

 * We accept ESCROW and alipay here.

* We also accept Paypal, T/T, Western Union, MoneyGram, etc. Please kindly contact us if you want to use these payments.

 

Shipping:

 * We do not ship this product by Singapore /HK/ China Post Air Mail or other cheap and long-time shipping ways. Because they are hard to track and will take more time. Especially, they are not so safe.

* We will use FedEx/DHL/UPS/TNT/EMS for fast and safe shipping. We will use the most convenient one when you buy the product.

* Before shipping, we will pack every product well for you. And please inspect the parcel when you receive it.

* As the batteries belong to dangerous goods,they are not available for air shipment now. For the items include batteries in our store, we will not put batteries in the package for shipment.You can buy the batteries at your location freely. Please kindly note this.

* If you have special requirement for shipping, please let us know in advance.

 

Warranty:

 We provide 12 months Warranty for all our products!

* If you are not satisfied with our products when you receive them, please return it within 7 days for a replacement or money back. Please contact us before you return it.

* If item is defective in 1 month for product reason, we will send you a replaced spare part without extra charge, or offer refund after we receive the defective item.

* If item is defective after 1 month, you can still send it back to us. We will fix it for you free of charge and send it back to you, but you should bear the shipping cost.

 

Remark:

* If you are satisfied with our goods and services, please give us Five Star positive feedback, next time you will get $1 discount for each product. If there is any problem, please let us know in time as well. We will do our best to support you to solve this. Please do not give us negative feedback without any prior communication. Hope your understanding and thanks in advance.