Cartoon Twisted Machine Eraser Egg Eraser New Modern Eraser Design 2 Sets Per lot

Cartoon Twisted Machine Eraser Egg Eraser New Modern Eraser Design 2 Sets Per lot
  • Продавец
  • Список ценUS $41.73piece
  • Продажная ценаUS $41.73piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,1 (935)

Oписание продукта


Product Pictures

Normal Mode - CodingNormal Mode - DisplayNormal Mode - HardwareNormal Mode - HDDNormal Mode - MonitorNormal Mode - SWLNormal Mode - SystemService Mode - DisplayService Mode - LCodeService Mode - SystemService Mode - Hardware

Product Descriptions

SetConfig for RNS 2.5.1
Software version: 2.5.1
License: Professional
    SetConfig is the only product in market which offers possibility to safely work with new hardware versions, including support for C12 H09 and above. It allows to identify the troublesome units, and there is a special fix procedure for them, after applying it is possible to change the PIN code and all identification data with SetConfig or even with any other tool. But if the unit was damaged and it is not able to boot, then the S29AL016 flash on motherboard must be reprogrammed with external EEPROM programmer and then SetConfig can be used to erase the NAND memory.
Hardware for SetConfig:
    Our hardware based on original FTDI chip (not blocked after FTDI driver update) and original VW 26-pin connector (part number: 7L6 972 726)
Operation description(Not include in the Packing List):
Connection goes through 26-pin connector.
USB-RS232 Cable pinouts:
26-pin connector pinouts:
Pin 1 – TX Data    Pin 2 – RX Data    Pin 14 - GND
How to use?
    1. Plug power connector to RNS, if you connect RNS on the table.
    2. Connect SetConfig cable to pinouts.
    3. Launch the software. SetConfig automatically connects to RNS.
Related Products